And he did a head job. LOL.
Blockage in flow such as a Stuck thermostat, plugged heater core or radiator.
No cooling fan
Air pockets-was it bled?
Improper head job. Head shaved and all specs as well as tightening sequenced followed? Were the heads pressure tested and magna fluxed for cracks?
Why was it replaced the first time?
Check compression again.
Bad coolant temp sensor or one not plugged back in.
OVerheating can again cause a head gasket or head to fail again.
Tuesday, June 9th, 2009 AT 7:44 PM