1995 Ford Bronco need to replace starter

Pretty simple repair for the bronco. Before removing electrical wiring from starter motor, be sure to tag them so you know where they go back on new starter motor. Be sure to torque the bolts back properly, if your starter has 3 mounting bolts then they will torque back to 12 - 15 Ft. Lbs, if it only has 2 mounting bolts then they tighten to 15 - 20 Ft. Lbs. Don't let the little starter fool you either, once it is loose it can be quiet heavy, especially if you are at an awkward position under vehicle. Always disconnect negative battery cable before making repairs on any electrical system.