Front and rear differential and transfer case and transmission fluid instructions needed

2016 CADILLAC ATS
39,000 MILES • 2.0L • 4 CYL • 4WD • AUTOMATIC
Avatar
SIRJR
  • MEMBER
  • 86 POSTS
I am preparing to change the front and rear differential and transfer case and transmission fluid. Would you be able to provide the instructions and pictures that will enable me to perform this correctly? Thank you.
May 9, 2021 at 8:44 AM
Advertisement
Avatar
ASEMASTER6371
  • ASE Certified Mechanic
  • 52,796 POSTS
  • ASE Certified Mechanic
Good evening,

I attached procedures and pictures for you below. The front and rear differentials are the same.

https://www.2carpros.com/articles/differential-service

The transfer case and transmission are attached.

https://www.2carpros.com/articles/how-to-service-an-automatic-transmission

Roy
May 9, 2021 at 8:50 PM
Avatar
SIRJR
  • MEMBER
  • 86 POSTS
Thank you very much for all the detailed pictures. I have a question regarding the 7th picture of the transfer case. There is a #3; however, there is no mention of this in the diagram. Also, do you have the fill capacity of the transfer case? Thank you, Steve
May 10, 2021 at 5:48 AM
Avatar
ASEMASTER6371
  • ASE Certified Mechanic
  • 52,796 POSTS
  • ASE Certified Mechanic
Number 3 is a switch. You may or may not have this.

I attached the capacity for the transfer case below.

Roy
May 10, 2021 at 5:58 AM
Avatar
SIRJR
  • MEMBER
  • 86 POSTS
Thank you very much.
May 14, 2021 at 4:25 AM
Avatar
ASEMASTER6371
  • ASE Certified Mechanic
  • 52,796 POSTS
  • ASE Certified Mechanic
You are welcome.

Always glad to help.

Roy
May 14, 2021 at 4:26 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.