Fault Log Report on Toyota sienna

190 MILES • 3.0L • V6 • 2WD • AUTOMATIC
Avatar
TUBHOOR
  • MEMBER
  • 1 POST
P0125: Insufficient Coolant Temperature for Closed Loop Fuel Control

P0135: O2 Sensor Heater Circuit (Bank 1 Sensor 1)

P0141: O2 Sensor Heater Circuit (Bank 1 Sensor 2)

P0155: O2 Sensor Heater Circuit (Bank 2 Sensor 1)

P0500: Vehicle Speed Sensor

P0710: Transmission Fluid Temperature Sensor Circuit

P0773: Shift Solenoid "E" Electrical
Mar 28, 2014 at 4:09 PM
Avatar
KNOWLEDGE IS POWER
  • EXPERT
  • 1,136 POSTS
Start with the coolant temp too low. Make sure it's actually too cool. Check it with a thermometer. If it's running at the proper temp then the sensor is unplugged, bad, or the wires to it are damaged. If it's really cool then the thermostat is to blame. Running too cool makes the ECM unhappy. Remedy the temp then see what codes return
Mar 28, 2014 at 6:30 PM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle