Engine Rattling/Check Engine Light after repairs

113,000 MILES • 3.8L • V6 • AUTOMATIC
Avatar
KNHAUSER
  • MEMBER
  • 3 POSTS
After resealing/repairing the intake manifold gasket, I am getting a Check Engine Light and my vehicle is vibrating when idling and on the highway. There has been no loss of control but the rattle is very noticeable. Where should I start checking for troubleshooting? The nearest place with a code scanner is about 3 miles away.
Nov 18, 2015 at 1:51 AM
Advertisement
Avatar
WRENCHTECH
  • ✓Experienced Mechanic
  • 20,760 POSTS
What is the code number being set in the computer when the light comes on?
Nov 18, 2015 at 3:06 AM
Avatar
KNHAUSER
  • MEMBER
  • 3 POSTS
Codes are P0305 - Cylinder 5 misfire and P0113 - Intake Air Temperature Sensor Circuit High Input
Nov 18, 2015 at 3:10 AM
Avatar
WRENCHTECH
  • ✓Experienced Mechanic
  • 20,760 POSTS
You are going to have to find the cause for the cylinder #5 misfire. Check all you coilss and plug wires.

The air temp sensor code was probably due to turning the key on while the snorkel was off and the sensor was unplugged. Make sure it is plugged in now and clear the code.
Nov 18, 2015 at 3:17 AM
Avatar
KNHAUSER
  • MEMBER
  • 3 POSTS
Will do. Thanks!
Nov 18, 2015 at 3:20 AM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle