Why Eco light blinks on idling and during driving at higher speeds? Thanks.
Dec 6, 2021 at 5:50 AM
ECO light blinks
2006 SUBARU FORESTER
DEO NIXON
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Hi,
This light commonly flashes when there are transmission issues. Have you noticed any performance issues? The idea that you notice it at high speeds and at an idle leads me to think there could be an issue with the TCC (torque converter clutch solenoid).
If you haven't, I would start by scanning the can-bus system. CAN stands for controller area network. All modules/computers are tied together via a few wires. This should indicate if there is a code stored, regardless of the module holding it.
Take a look through this link. It explains the procedure and how it works.
https://www.2carpros.com/articles/can-scan-controller-area-network-easy
Let me know if you have already done this. Also, if codes were found, let me know.
Take care,
Joe
This light commonly flashes when there are transmission issues. Have you noticed any performance issues? The idea that you notice it at high speeds and at an idle leads me to think there could be an issue with the TCC (torque converter clutch solenoid).
If you haven't, I would start by scanning the can-bus system. CAN stands for controller area network. All modules/computers are tied together via a few wires. This should indicate if there is a code stored, regardless of the module holding it.
Take a look through this link. It explains the procedure and how it works.
https://www.2carpros.com/articles/can-scan-controller-area-network-easy
Let me know if you have already done this. Also, if codes were found, let me know.
Take care,
Joe
Dec 6, 2021 at 6:49 PM
Advertisement