1990 Eagle Talon Removing driveshaft

1990 EAGLE TALON
Avatar
BLUEOLDSCUTLASS
  • MEMBER
  • 1 POST
Drive Train Axles Bearings problem
1990 Eagle Talon 4 cyl All Wheel Drive Manual

Is there a special method to pull the front driveshaft yoke out of the transaxle? We are removing the engine transaxle assembly and we can't pull the the driveshaft backwards.
Feb 4, 2010 at 7:50 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
WHITEBOYZRACING
  • MEMBER
  • 12 POSTS
If you are tryn to pull the drive shaft out, you need to remove the transfer case, there are (5) 17mm bolts that hold the transfer case to the transmission then u just pry it off the input shaft on the trany and remove the driveshaft. or if you are talking about the front axles you have to remove the axle nuts wich are 32mm.
Mar 6, 2010 at 8:50 PM