Driver blend door actuator location?

2014 LINCOLN MKZ

160,000 MILES • 2.0L • 4 CYL • 2WD • AUTOMATIC

JOEHOGAN76

MEMBER
1 POST
FOLLOW

My A/C blows hot from the driver side, but cold on the passenger side. I removed what I thought was the blend door actuator, but I believed I removed the mode door actuator instead. I used the diagram for a Ford Fusion thinking this was the correct one, as it was the lower actuator (I can't see another actuator on the driver side). Can you help me identify the correct actuator and its location please?

Jun 20, 2023 at 7:12 PM

Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.

JACOBANDNICKOLAS

AUTOMOTIVE REPAIR CONTRIBUTOR
110,190 POSTS

Hi,

You need to remove the accelerator pedal to access the driver's side. I attached the directions below which are vague. However, I also attached the directions for removing the pedal.

Let me know if this helps.

Take care,

Joe

See pics below.

Images (Click to enlarge)

Jun 20, 2023 at 11:27 PM