2005 Dodge Truck deisel

2005 DODGE TRUCK
69,245 MILES • 6 CYL • 4WD • AUTOMATIC
Avatar
MIKE TERVORT
  • MEMBER
  • 1 POST
my truck has oil and exaust coming out its blow by hose it seems to be to much what does it take to fix it
Aug 24, 2008 at 4:09 AM
Advertisement
Avatar
MHPAUTOS
  • ✓Experienced Mechanic
  • 31,937 POSTS
Hi there,

Thank you for the donation.

The first thing you will have to get done is have a compression test done and a leak down test to check the condition of the rings, your problem is usually a result of over pressurizing the sump this is caused by compression by-passing the rings. If the oil has not been changed or incorrect oil used as a mixture with diesel oil can cause the rings to fail causing this blow by, start with the compression test and a service with a good engine oil flush will not hurt either, start here.

Mark (mhpautos)
Aug 24, 2008 at 3:10 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.