SPONSORED LINKS

1993 Dodge Intrepid CHECK ENGINE LIGHT IS ON

Tiny
DUSTYNISMO
  • MEMBER
  • 1993 DODGE INTREPID
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 124,000 MILES
THE CHECK ENGINE LIGHT IS ON SO I AM WONDERING WHERE IS THE PORT FOR PLUGGING IN A SCAN TOOL IF POSSIBLE? IF NOT POSSIBLE CAN YOU JUMP A PLUG AND WATCH FOR A BLINKING SEQUENCE LIKE OLD OBDO AND OBD1.
NOTE : IT DOES SEEM LIKE A MISFIRE DUE TO WHAT I BELEIVE BAD GAS, TOO MUCH MOISTURE, IT WAS FROM CASEY'S AND I WILL NEVER BUY THERE AGAIN. THIS CAR IS NEW TO ME AS TWO OR THREE MONTHS. IT WAS MY FATHER IN LAW AND IT HAS ALWAYS RANLIKE A CHAMP.
NOTE: 3.5 ENGINE
THANKS FOR THE TIME AND HOPE I GET AN ANSWER SOON I DON'T LIKE DIVING IT WITH THE LIGHT ON I HAVE AVOIDED DRIVING AS MUCH AS POSSIBLE
SPONSORED LINKS
Tuesday, December 9th, 2008 AT 12:04 AM

1 Reply

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,885 POSTS
Hi:
I believe on the 93 you need to cycle the ignition three times from off to run. On the 3rd time, let the key on and the check engine should flash codes that are stored.

Let me know if this works.

Joe
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, December 14th, 2008 AT 12:54 AM

Please login or register to post a reply.

Related Check Engine Light Content

Code Read Retrieval/Clear - Dodge Stratus
VIDEO
Code Read Retrieval/Clear - Dodge Stratus
Instructional repair video
Check Engine Light
GUIDE
Check Engine Light
Why is my check engine or service engine soon turned on? In this guide we talk about what this is associated with this notorious light, what it is used for and what you...
VIEW MORE

Sponsored links