1990 Dodge Dakota slipping

Avatar
FREDTABOR
  • MEMBER
  • 1 POST
Transmission problem
1990 Dodge Dakota 6 cyl Two Wheel Drive Automatic

When I drive about a 1/2 mile the tranny slips and the truck stops. After about 2 min I can go again for about another 1/2 mile and the same thing. Do you think the filter is clogged or is there something I am overlooking? What is the capacity of the tranny and the torque on the pan bolts?
Aug 18, 2009 at 4:10 AM
Avatar
CH112063
  • ✓Experienced Mechanic
  • 1,320 POSTS
I think the filter keeps sucking up debris and the trans loses pump pressure cause the filter gets blocked. A service may help a little, but not for long if at all. The capacity for a dry trans for that unit is 17.1 pints. use 3 or 4 quarts if just servicing. And the pan bolts are supposed to be 150 inch lbs. or 12 and a half foot lbs. Use type 7176 Mopar type fluid. If the gasket you use tells you a different tightening torque for the oil pan, use that instead. Ok Mr. fredtabor.
Sep 3, 2009 at 8:25 AM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle