SPONSORED LINKS

1988 Dodge Dakota Transmission slip and shift hard

Tiny
BRC2283
  • MEMBER
  • 1988 DODGE DAKOTA
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 145,500 MILES
When I shift the truck into gear on the column it kicks in hard. It also slips slightly going into 2nd and 3rd. I was going to try a new filter and some new atf 4. Do you think that might help? What do you think the problem is?
Saturday, December 12th, 2009 AT 11:06 PM

2 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,755 POSTS
You could try the service, but chances are it won't change anything. Actually, it sounds like it is time for a general rebuild. The hard shift is most likely coming from the valve body. What concerns me the most is the slipping. If the trans slips, the clutch plates are most likely bad. I have one last question. Has the check engine light ever come on? The reason I ask is because there are sensors for the trans that can go bad and set the light.

Let me know if you have other questions.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, December 14th, 2009 AT 10:30 AM
Tiny
BRC2283
  • MEMBER
  • 2 POSTS
Yes the check engine light has come on. My father mentioned some sort of module, possibly external that could be causing an issue. Do you know anything about that? And what sensors may be causing this? Thanks.

Brad
Was this
answer
helpful?
Yes
No
Thursday, December 17th, 2009 AT 11:00 AM

Please login or register to post a reply.

Related Transmission Slip Content

VIEW MORE

Sponsored links