Hi Could you please tell me what tools are needed to replace back rear discs and pads, and complete how to
Thank you
Thank you
Mar 30, 2010 at 9:05 AM
2009 Dodge Caravan rear disc brakes
2009 DODGE CARAVAN
GUY2
- MEMBER
- 1 POST
Advertisement
JACOBANDNICKOLAS
- ✓ASE Certified Mechanic
- 110,194 POSTS
Hi:
Here is a how to video and directions to help with the replacement of rear disc brakes. As far as the tool to unbolt the caliper, it could be a few different things. It could be a 10mm socket, torx, or an allen wrench. It is all based on what they had at the time of production. Check out the video it will both show and explain how to do the job.
https://youtu.be/hPzxdnLJbhc
If you have questions, let me know.
Joe
Here is a how to video and directions to help with the replacement of rear disc brakes. As far as the tool to unbolt the caliper, it could be a few different things. It could be a 10mm socket, torx, or an allen wrench. It is all based on what they had at the time of production. Check out the video it will both show and explain how to do the job.
https://youtu.be/hPzxdnLJbhc
If you have questions, let me know.
Joe
Feb 20, 2021 at 12:57 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.