Removal & Installation (3.3L )
Disconnect negative battery cable.
Disconnect field harness connector from generator. Remove B+ terminal nut and wire from generator. Raise and support vehicle.
Remove right front lower splash shield.
Remove accessory drive belt.
Remove lower engine oil dip stick mounting bolt, located near engine oil filter.
Remove harness from engine oil dip stick.
Remove 3 generator mounting bolts.
Lower vehicle. Remove engine oil dip stick tube from vehicle.
Roll and remove generator.
To install, reverse removal procedure.
Good luck
SPONSORED LINKS
Saturday, September 20th, 2008 AT 7:37 PM