1987 Dodge Aries windshiel wipers

1987 DODGE ARIES
Avatar
CAPTAINGUITAR1
  • MEMBER
  • 1 POST
1987 Dodge Aries 4 cyl Two Wheel Drive Automatic

I just bought an aries wagon, had the cam shft seal replaced. great car, but only one wiper (pasenger side) works. I can freely move the drivers side with my hand. I figure the linkage must have come loose . how do i get in there with as little dis assembly as possible? thank you for your time.
Oct 15, 2008 at 10:42 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • ✓ASE Certified Mechanic
  • 110,194 POSTS
  • ASE Certified Mechanic
The only to get to the wiper linkage is to remove the cowl located at the bottom of the windshield (exterior). You will need to open the hood of the car, and you will see several screws that hold the cowl in place. remove the screws and remove the cowl and you'll have access to the linkage.

I hope this helps. Let me know if you have any other questions.

Joe
Oct 22, 2008 at 7:37 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.