Advertisement
Advertisement

Crank but will not start

76,000 MILES • 3.8L • V6 • 2WD • AUTOMATIC
Avatar
JUSTIN_ALLEN
  • MEMBER
  • 2 POSTS
It has been sitting a year, was throwing a fuel filter code. I replaced the fuel filter and all the fluids before we tried to crank it. It would crank but not start. No codes anymore. Replaced the spark plugs and wires. Now it will start for a few seconds, then backfire and stop.
Aug 30, 2019 at 11:55 AM
Avatar
SCGRANTURISMO
  • ✓Experienced Mechanic
  • 4,897 POSTS
Hello,

Have you checked the fuel in the fuel tank? Sometimes when a vehicle has been sitting for a while, water can leak into the fuel tank or sometimes the fuel will turn into a varnishy like substance that will gum up the fuel lines and injectors. Check the fuel and get back to us with what you are able to find out.

Thanks,
Alex
2CarPros
Aug 30, 2019 at 12:27 PM
Advertisement
Avatar
JUSTIN_ALLEN
  • MEMBER
  • 2 POSTS
When I dropped the tank and replaced the fuel pump and filter, I thoroughly cleaned the tank and inspected it before putting new gas in. All pressure to engine from tank is good as well.
Aug 30, 2019 at 12:43 PM
Avatar
SCGRANTURISMO
  • ✓Experienced Mechanic
  • 4,897 POSTS
Hello,

Okay, can you double check that the spark plug wires are correctly routed to the right cylinders? I have included a diagram of the spark plug wire routing for your vehicle in the diagrams down below. Please double check the spark plug wires and get back to us with what you are able to find out.

Thanks,
Alex
2CarPros
Aug 30, 2019 at 12:54 PM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle

Advertisement