Convertible top will not open?

2006 CHRYSLER CROSSFIRE
40,000 MILES
Avatar
ZANNE CLEMENTE
  • MEMBER
  • 1 POST
Convertible top will not open, scanner shows no communication. Is there a scanner to pinpoint the exact issue for this vehicle?
Jun 30, 2025 at 10:14 PM
Advertisement
Avatar
MECHTRIX
  • ✓Experienced Mechanic
  • 393 POSTS
Yes there is ..If you have a bi directional scanner you can test it by activating the motors and things ..but if it's not communicating it might have a problem with the module that monitors the accessories and gadgets around the car ..it can be malfunctioning or bad ..a bi directional scan tool can also tell you about that and even sometimes reset the module and or the device function and make it work again ...but at least it can tell you more and help to isolate the problem you might be having... hope this help "good luck" .
Jul 1, 2025 at 7:54 AM
Avatar
STRAILER
  • ✓Experienced Mechanic
  • 55,051 POSTS
I would check fuse #5 and #6 in the fuse panel in the under hood fuse panel which goes to the module, here is a guide to help you test the fuse and to test for power.

https://www.2carpros.com/articles/how-to-check-a-car-fuse

Please go over this guide and get back to us.
Sep 5, 2025 at 10:15 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.