Code p0108, hesitation, rich fuel, catalytic converter very hot, stalls on acceleration?

2003 ACURA TL
200,000 MILES • 3.8L • V6 • 2WD • AUTOMATIC
Avatar
DAVID SPRAY
  • MEMBER
  • 1 POST
MAP sensor code came up p0108 replaced MAP sensor worked okay for a day or two and doing the same thing again. I'm going to do a vacuum check tomorrow. Anything else you could think of that would be a good idea to check or know of any common problems like this and quick fixes. Please let me know if you have any questions or concerns or ideas, please. Thank you, David Spray
Mar 25, 2023 at 8:09 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
STRAILER
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 54,176 POSTS
This is common when the catalytic converter needs to be replaced because the material inside breaks down and melts together effectively clogging the exhaust system. This guide can help confirm the problem and I have included how to change out the converter in the images below:

https://www.2carpros.com/articles/how-to-test-a-catalytic-converter

This guide can help walk you through the steps it is one a similar car, but the procedure is the same:

https://www.2carpros.com/articles/catalytic-converter-replacement


Check out the images (below). Please let us know what happens.

Image (Click to enlarge)
Attached Media
Mar 26, 2023 at 6:53 PM
Advertisement