Clutch pedal stiff after replacing clutch master and slave cylinder

1995 SATURN SL1
125,000 MILES • 1.8L • 4 CYL • 2WD • MANUAL
Avatar
AUSTIN SULT
  • MEMBER
  • 1 POST
Master and slave cylinder was a closed system and Napa said not to bleed. Pedal is stiff and feels like it is going to break something if pressed too far.
Oct 25, 2019 at 8:32 PM
Advertisement
Avatar
ASEMASTER6371
  • ✓Experienced Mechanic
  • 52,796 POSTS
Good morning,

What happened to the old master and slave?

The issue may not be the slave or master, it may be the clutch itself. Check out the diagrams (Below). Please let us know what happens.

Roy
Images (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Oct 25, 2019 at 9:50 PM
Avatar
ASEMASTER6371
  • ✓Experienced Mechanic
  • 52,796 POSTS
Good evening,

Yes, if you get aggressive, it will break something.

What concerns me is the clutch itself. You could have a bad pressure plate or the possibility the disc is in backwards.

You will need to remove the transmission and inspect it again.

We have a YouTube video on front wheel drive clutch replacements.

https://www.youtube.com/watch?v=6N6b5F2ChyE&t=1923s

Roy
Image (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Dec 16, 2020 at 9:08 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.