Clutch issues

1995 CHEVROLET CAMARO
228,878 MILES • 3.4L • V6 • 2WD • MANUAL
Avatar
LOSKI
  • MEMBER
  • 3 POSTS
For some reason when I try to put my car in gear and turn on the engine the car starts to move. Could it be something stuck? because my clutch doesn't seem to want to engage. I thought I bled and replaced the slave cylinder still with no results. Can't get what am I doing wrong?
May 11, 2022 at 5:06 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • ✓ASE Certified Mechanic
  • 110,194 POSTS
  • ASE Certified Mechanic
Hi,

It does sound like it is not fully disengaging. If you replaced the slave and bled the system, the next thing is the clutch master cylinder.

Check to make sure there are no leaks at the master cylinder and the slave. If there are none and the fluid is full, suspect the master cylinder is bad.

I attached the directions below for removal and replacement. Let me know if this helps.

Take care and let me know if you have questions.

Joe

See pic below.
Image (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
May 11, 2022 at 9:08 PM
Avatar
LOSKI
  • MEMBER
  • 3 POSTS
Thank you. I will give it a shot.
May 12, 2022 at 6:13 PM
Avatar
JACOBANDNICKOLAS
  • ✓ASE Certified Mechanic
  • 110,194 POSTS
  • ASE Certified Mechanic
Hi,

You are very welcome. Let me know what you find or if I can help in any way.

Take care,

Joe
May 12, 2022 at 7:52 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.