1990 Chrysler Van water pump

1990 CHRYSLER VAN
Avatar
TAMMYSOCAL
  • MEMBER
  • 1 POST
Engine Cooling problem
1990 Chrysler Van 6 cyl Front Wheel Drive Automatic

Just had radiator & therostat replaced. Now coolant is not circulating. What should I check or do next to fix this problem?
Nov 3, 2008 at 4:10 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
JACOBANDNICKOLAS
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 110,190 POSTS
Hi:
Is the engine overheating? Also, if the radiator is new, and the waterpump belt is working and spining the pump, either the new t-stat isn't opening or you have a rad hose pinching shut. Check the hoses when the car starts to get hot. Also, if you decide to remove the t-stat again, place it in a pot of boiling water to see if it opens.

Let me know what you find.

Joe
Nov 8, 2008 at 5:57 PM
Advertisement