The service engine light has come on. I had the computer checked and it indicated taht I had a bad o2 sensor. How do I change it?
Sep 24, 2008 at 7:09 AM
1999 Chrysler Town and Country o2 sensor
1999 CHRYSLER TOWN AND COUNTRY
ALCRAWFORD
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Hi
The o2 sensor is rather easy to replace. It will be located either on the exhaust manufold or the exhaust system itself. Locate the old one, disconnect the wiring plug to disconnect it, remove it using a deep well socket, replace it with the new one, and reconnect the wires to the new one.
If you have trouble, let me know.
Joe
The o2 sensor is rather easy to replace. It will be located either on the exhaust manufold or the exhaust system itself. Locate the old one, disconnect the wiring plug to disconnect it, remove it using a deep well socket, replace it with the new one, and reconnect the wires to the new one.
If you have trouble, let me know.
Joe
Oct 6, 2008 at 1:26 PM
Advertisement