SPONSORED LINKS

2003 Chrysler Sebring Rear hub/bearing assemblies

Tiny
SABER36
  • MEMBER
  • 2003 CHRYSLER SEBRING
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 121,000 MILES
The rear hub assemblies are starting to become noisy. I want to know if I can replace just the bearings or do I need to replace the whole hub/bearing assembly? How easy is it to replace either or? Thank you.
Saturday, January 31st, 2009 AT 3:07 AM

1 Reply

Tiny
BMRFIXIT
  • MECHANIC
  • 19,053 POSTS
REMOVAL - HUB AND BEARING
1. Raise vehicle on jack stands or centered on a frame contact type hoist.
2. Remove rear wheel and tire assembly.
3. Remove the rear brake caliper and rotor. Remove the brake rotor by pulling the rotor straight off the wheel mounting studs.
4. Remove dust cap from rear hub and bearing assembly by prying it off.
5. Remove hub and bearing retaining nut. 6. Remove rear hub and bearing from the spindle by pulling it straight off the spindle by hand.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, January 31st, 2009 AT 5:53 AM

Please login or register to post a reply.

Related Bearing Hub Replace/Remove Content

Wheel Bearing Hub Replacement
VIDEO
Wheel Bearing Hub Replacement
Instructional repair video
Bearing Hub Replacement
GUIDE
Bearing Hub Replacement
A bearing hub is used to allow the wheel to rotate while supporting the weight of the car and is mounted to the front or rear of the suspension system. The hub consists of a...
VIEW MORE

Sponsored links