2004 Chrysler Pacifica HeadLamps

2004 CHRYSLER PACIFICA
50,000 MILES • 6 CYL • AWD • AUTOMATIC
Avatar
CJM722
  • MEMBER
  • 1 POST
Is there an easier way to change the headlights on the Pacifica other than having to remove all these parts to get to the bulb? It seams there should be a screw or something that allows the headlamp assembly to come out forward allowing access.

Thanks for any help you can give.
Jan 22, 2009 at 7:12 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
JACOBANDNICKOLAS
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 110,190 POSTS
Access is gained from under the hood.
Mar 18, 2009 at 12:44 PM
Advertisement
Avatar
ABIBBO
  • MEMBER
  • 1 POST
unscrew the two philips head screws on top of the head light and slide the light foward out of its slot. the whole head light will come out. when putting in line up the lower tab and give a push till it clicks in. replace screws and the head light is all ready aligned
Jun 11, 2009 at 9:53 AM