2002 Chevy Venture Replacing thermostat

2002 CHEVROLET VENTURE
104,000 MILES • 6 CYL • 2WD • AUTOMATIC
Avatar
MCAMPBELL57
  • MEMBER
  • 1 POST
I was able to remove the thermostat housing and replace the thermostat. I got the top bolt started but do not have enough remove to get the bottom bolt started. Can you tell me the best way to gain access to start the bolt?
May 30, 2009 at 6:00 PM
Advertisement
Avatar
BRIAN 1
  • ✓ASE Certified Mechanic
  • 1,030 POSTS
  • ASE Certified Mechanic
these are a pain,you can either take the crossover pipe off which will give you good axcess but its alot of work.I use an open end or socket under the crossover pipe.there is not many options on these.you have to get creative.post back with what you find.
May 30, 2009 at 6:04 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.