1983 Chevy Van Grinding noises at starting

1983 CHEVROLET VAN
Avatar
GALYNA1
  • MEMBER
  • 1 POST
Noises problem
1983 Chevy Van 6 cyl Two Wheel Drive Automatic 50k miles

I've only owned the van for a month or so, and everything was fine. A few days ago it started sounding rough at starting, but nothing too bad. Last night it started making a pretty awful grinding sound when I started it, but then it was fine and drove like normal. Today it's MUCH worse - I was expecting the engine to explode or something. It sounds like the engine is eating another engine - very loud metal grinding. I can't get to a mechanic until the end of the week - what is this???
Sep 5, 2010 at 12:49 AM
Advertisement
Avatar
CARADIODOC
  • ✓ASE Certified Mechanic
  • 34,321 POSTS
  • ASE Certified Mechanic
Hi galyna1. Welcome to the forum. If the noise only occurs during cranking, the starter probably just needs a shim or two. I don't know why the noise doesn't occur right away but sometimes it shows up long after the starter has been replaced. It is due to the drive gear being too close to the teeth on the flywheel / flex plate. Replacement GM starters used to come with a pair of shims in case they were needed. Almost every mechanic had a bunch of unused ones in their tool boxes.

If the noise occurs after the engine has started, can you listen under the hood to see if you can determine its location? Any other things you can include to describe it will help too.

caradiodoc
Sep 5, 2010 at 1:57 AM
Avatar
MADMIKE1735
  • ✓ASE Certified Mechanic
  • 951 POSTS
  • ASE Certified Mechanic
sounds like the flywheel is starting to become stripped out.
Sep 5, 2010 at 1:58 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.