I've got a 03 tahoe and the fan speed only kicks in and works when its cranked all the way to high/5. Help?
Thursday, March 20th, 2008 AT 3:37 PM
2 Replies
2CARPRO JACK
MECHANIC
11,533 POSTS
Next to the blower motor is the fan speed control resistor. Follow the power wire back from blower to it. This is most likely the culprit
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+1
Thursday, March 20th, 2008 AT 5:36 PM
RASMATAZ
MECHANIC
75,992 POSTS
Your circuit starts at the control switch and then thru the blower motor resistor which will control the speed of the blower motor by increasing/decreasing resistances. Right now its bypassing the resistor and going direct to the motor without controlling the speed of the motor.