1996 Chevy Silverado Truck has spark and will only crank w

Tiny
BIGEASY5
  • MEMBER
  • 1996 CHEVROLET SILVERADO
  • V8
  • 4WD
  • AUTOMATIC
  • 210,320 MILES
I have replaced the fuel filter and fuel pump, and my truck has spark because it starts for a few seconds when I use the gas rag. I can hear the fuel pump come on, and have checked the pressure. Could it be the fuel pressure regulator or what?

I am making a donation and apologize that I can't donate more, but I just got laid off at my job.

Thanks!
Tuesday, March 30th, 2010 AT 9:36 AM

6 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Hi Bigeasy5, Welcome to 2carpros and TY for the donation

You've check the fuel pressure what was the fuel pressure readings? Also did you check if the injectors are pulsing-Get back asap-so we can continue to assist.
Was this
answer
helpful?
Yes
No
Tuesday, March 30th, 2010 AT 4:52 PM
Tiny
BIGEASY5
  • MEMBER
  • 3 POSTS
Sorry it took me so long to reply, but now my computer is giving me trouble too!LOL

Anyway, when I checked the fuel pressure it was 60 psi. I haven't been able to check or test the injectors because I haven't been able to take the manifold off yet, and I plan on doing it tomorrow.
Was this
answer
helpful?
Yes
No
Thursday, April 1st, 2010 AT 2:10 PM
Tiny
2 LINSEY
  • MECHANIC
  • 287 POSTS
Hi bigeasy5,

Just wanted to see where you were at with your testing and if you ever got that manifold off? Let us know so we can get you figured out.
Was this
answer
helpful?
Yes
No
Monday, April 5th, 2010 AT 1:24 PM
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
I haven't been able to check or test the injectors. The resistances of the injector should be 11.8-12.6 ohms
Was this
answer
helpful?
Yes
No
Monday, April 5th, 2010 AT 2:23 PM
Tiny
BIGEASY5
  • MEMBER
  • 3 POSTS
Had a family emergency that took me out of town, so I should be back to do it by Wednesday. What did you mean by "resistance of injectors should be 11.8-12.6 ohms?"
Was this
answer
helpful?
Yes
No
Monday, April 5th, 2010 AT 10:42 PM
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
You use an ohmmeter to measure the resistances between the injector teminals
Was this
answer
helpful?
Yes
No
Tuesday, April 6th, 2010 AT 11:23 AM

Please login or register to post a reply.

Sponsored links