1992 Silverado right-side tail lights not working

1992 CHEVROLET SILVERADO
Avatar
JORDO
  • MEMBER
  • 1 POST
I had to rock the truck pretty hard to get out of the mud a couple weeks ago and afterwards my right blinker indicator and light were flashing superfast. A few days later all three right side lights went out. When I checked em only one bulb was out. I changed em all, but I'm still not getting power.
So it must be the wiring, but I'm not sure how to tackle that. I'd appreciate any guidance you fellas can give me.
Jan 23, 2006 at 2:19 PM
Avatar
BUSMAN97
  • MEMBER
  • 2 POSTS
I had the same problem with my 94 Silverado. All I did was change the light assembly. I've had no problems since then and that was 2 years ago. The change out was pretty easy, and the price was about 40.00/
Jan 24, 2006 at 4:13 PM
Avatar
FIXMYTRUCK94
  • MEMBER
  • 6 POSTS
there is a wiring harness that separates near the end of the truck bed to allow for a trailer wire harness to be inserted. This could be separated. Also there could be a lose of a ground wire to that light assembly.
Feb 21, 2006 at 6:55 AM
Avatar
BOOMER2782
  • MEMBER
  • 22 POSTS
Check all of your wiring harnesses for tightness and connection. Sounds to me like the mud may have loosened a connection, or the water may have corroded the connector.
Feb 21, 2006 at 8:12 AM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Ask a new question

Frequently Asked Problems for This Vehicle