1999 Chevy S-10 Transmission trouble

1999 CHEVROLET S-10
70,000 MILES • 4 CYL • 2WD • MANUAL
Avatar
TCADY
  • MEMBER
  • 1 POST
Thank you for your help!! I have a 1999 Chevy S10 stick shift pickup that will start when the clutch is pushed in, and it will go into each gear including reverse, but the gears will not engage, so it will not move. You can hear it click into each gear. I towed it home, and noticed that when l was being towed l tried all the gears and they would not engage then either, but l also noticed that when l was being towed, and put it in reverse, that the gears did grind which made me think it was engaging in reverse. I had a friend look at it... He seems to think that it may be an internal transmission problem with some type of chain? that is inside the transmission. Thank you again for your help!!
Nov 17, 2009 at 12:37 PM
Advertisement
Avatar
KNOWYOURAUTO
  • ASE Certified Mechanic
  • 113 POSTS
  • ASE Certified Mechanic
A quick check based on your symptoms is to inspect the rear differential. Power cannot be transmitted to the wheels if the gears are broken there. The fluid fill plug is towards the top and can be removed with a 3/8" socket wrench and 2" short extension,(no socket needed). Smell the plug. A burnt up rear end will have a very strong smell.

We can continue inspections if this does not prove beneficial.

Good luck,
Nov 17, 2009 at 1:26 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.