1998 Chevy S-10 sensor

1998 CHEVROLET S-10
127,000 MILES • 4 CYL • 2WD • AUTOMATIC
Avatar
RUDY209
  • MEMBER
  • 2 POSTS
how do i replace MAP sensor on my s10 2.2 engine
Jul 28, 2010 at 7:08 PM
Advertisement
Avatar
RASMATAZ
  • ✓ASE Certified Mechanic
  • 75,992 POSTS
  • ASE Certified Mechanic
Service and Repair


https://images.2carpros.com/forum/automotive_pictures/12900_m_1.gif


https://images.2carpros.com/forum/automotive_pictures/12900_m1_1.gif

Removal Procedure Remove the electrical connector. Remove the attaching screw (1). Remove the bracket (2). Remove the Manifold Absolute Pressure (MAP) sensor (3) from the intake manifold (4). Installation Procedure Install the MAP sensor (3) into the intake manifold (4). Install the MAP Sensor bracket (2). Install the the attaching screw (1). Tighten the attaching screws to 4-6 N.m (35-53 lb in). Install the electrical connector. https://www.2carpros.com/kpages/auto_repair_manuals_alldata.htm
Jul 28, 2010 at 8:24 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.