1997 Chevy S-10 no warning lights

Tiny
KNOTHEAD573
  • MEMBER
  • 1997 CHEVROLET S-10
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 215,000 MILES
Turn key on will shift without foot on brake no turn signals, no ck engine light, seatbelt, airbag, safety lights, ect. Cranks does not start has spark batt good also obd2 reads err
Thursday, February 19th, 2009 AT 6:38 PM

9 Replies

Tiny
2CARPRO JACK
  • MECHANIC
  • 11,533 POSTS
Sounds like an ignition switch. Use a test light to see if there is any power to the fuses for the accessories at the fuse block. Check every fuse in the vehicle, underhood and underdash
Was this
answer
helpful?
Yes
No
+1
Friday, February 20th, 2009 AT 8:07 AM
Tiny
KNOTHEAD573
  • MEMBER
  • 6 POSTS
Tried new ignition switch did not work. Did you mean ignition assembly? Had juice to fuses. Thank you
Was this
answer
helpful?
Yes
No
Friday, February 20th, 2009 AT 10:13 PM
Tiny
2CARPRO JACK
  • MECHANIC
  • 11,533 POSTS
Yes, I meant the electric part of the switch, not the tumbler. Sounds like the VCM isnt turning on. There are several fuses and the ignition that power the VCM (vehicle control module). Check for power at pin 16(pink wire) on the VCM to se if it has power with key on. That feed comes from the ECM/IGN fuse
Was this
answer
helpful?
Yes
No
Saturday, February 21st, 2009 AT 8:01 AM
Tiny
KNOTHEAD573
  • MEMBER
  • 6 POSTS
Was this
answer
helpful?
Yes
No
Sunday, February 22nd, 2009 AT 10:14 PM
Tiny
2CARPRO JACK
  • MECHANIC
  • 11,533 POSTS
Did you try the electrical part of the switch? Or was it the key tumbler?
Was this
answer
helpful?
Yes
No
Sunday, February 22nd, 2009 AT 10:16 PM
Tiny
KNOTHEAD573
  • MEMBER
  • 6 POSTS
Rechecked fuses no.S 4, 5, 10, 16, 20, & 23 did not work with key on did not find #16 pink wire. Will try looking again. It was tumbler, will try electrial thank you.
Was this
answer
helpful?
Yes
No
Sunday, February 22nd, 2009 AT 10:20 PM
Tiny
KNOTHEAD573
  • MEMBER
  • 6 POSTS
[quote="knothead573"]
Was this
answer
helpful?
Yes
No
Sunday, February 22nd, 2009 AT 10:27 PM
Tiny
KNOTHEAD573
  • MEMBER
  • 6 POSTS
Replaced ignition switch everything working just fine now thank you
Was this
answer
helpful?
Yes
No
Monday, February 23rd, 2009 AT 8:21 PM
Tiny
2CARPRO JACK
  • MECHANIC
  • 11,533 POSTS
Glad to hear it
Was this
answer
helpful?
Yes
No
Friday, February 27th, 2009 AT 7:58 AM

Please login or register to post a reply.

Sponsored links