1996 Chevy Monte Carlo control arm problem

BLACKZ34

MEMBER
1996 CHEVROLET MONTE CARLO
6 CYL
FWD
AUTOMATIC
186,000 MILES

I am having a problem getting the last bolt off of the bottom control arm but the nut is off. I have tried nice blows w/ a hammer plus heat, and every other thing else. The control arm was bent in a slight rub w/ a curb any sugg? Thanks

Monday, December 17th, 2007 AT 6:01 PM

1 Reply

DENNYP

MECHANIC
1,824 POSTS

Soak it with PB Blaster overnight.

Please login or register to post a reply.

1996 Chevy Monte Carlo Rusting Strut Plate

The Passengers Side Rear Strut Plate On My 96 Monte Carlo Is Rusted Out So Badly I Can See The Inside Of My Trunk. Im Just Wondering If Its...

Asked by Keithborden08 ·

1 ANSWER

1996

CHEVROLET MONTE CARLO

Ball Joints

How To Test Ball Joints For Wear 98 Monte. Car Pulling To Left

Asked by PcDuke1913 ·

2 ANSWERS

1998

CHEVROLET MONTE CARLO

Ball Joint

99 Monte Carlo 130,000 3.1 V6 As U Know The Ball Joint Is On The Bottom Of The. Thing That Holds On The Caliper And Rotor. The Rivets Are...

Asked by sketty20 ·

1 ANSWER

CHEVROLET MONTE CARLO

2002 Chevy Monte Carlo Rear Suspension

I Ran Over A Pot Hole And Now It Feels Like My Car Is Rolling On A Oval Wheel. I Checked The Rim And Wheel And They Seem To Be Fine. Could...

Asked by dannyrojas27 ·

1 ANSWER

2002

CHEVROLET MONTE CARLO

Suspension Problems...

I Have A 1984 Monte Carlo Ss. It Was Lifted To Fit 24 Inch Rims. I Don't Know What Kind Of Springs Or Shocks They Used. It Has 24s On It...

Asked by 84SS ·

1 ANSWER

1984

CHEVROLET MONTE CARLO

Sponsored links

Ask a Car Question. It's Free!

1996 Chevy Monte Carlo control arm problem

1 Reply

Please login or register to post a reply.

Related Lower Control Arm Bolt Content

1996 Chevy Monte Carlo Rusting Strut Plate

Ball Joints

Ball Joint

2002 Chevy Monte Carlo Rear Suspension

Suspension Problems...

Sponsored links