Replaced starter now car won't turn over, PLEASE HELP

Avatar
STEVENTHESEEKER
  • MEMBER
  • 2 POSTS
I just replaced it and now car wont turn over. Is it possible i messed up the wiring with the starter or installed it wrong. It has been sitting for about a month without being started. The car will crank but not turn over. WHat could be the problem? thanks STeven
Jan 7, 2006 at 7:36 PM
Avatar
HAZ_R_DOUS1
  • MEMBER
  • 6 POSTS
try checking to make sure you put the small wire on the S term. and not on the R term. then check your battery cable to make sure it is tight and a good charge on the battery. (and do you mean it will crank but not run or will not even try to crank. listen for a click if you hear that then try what i typed it should work)
Haz
Jan 9, 2006 at 8:56 AM
Avatar
MIKEINCAN
  • MEMBER
  • 8 POSTS
try giving it a boost. that might be the problem
Jan 9, 2006 at 12:20 PM
Avatar
JONNYBER
  • MEMBER
  • 2 POSTS
I have the same problem w/ my 95 Blazer. It won't even turn over i get nothing. All my dash lights go on, the fuses are fine and the radio works. I was told to trace the small wire on the selenoid back to the relay, but I'm having a hard time finding it. Keep me in mind if you find a solution.
Jan 13, 2006 at 2:44 AM
Avatar
ROLFESJ
  • MEMBER
  • 3 POSTS
I am not sure if this is one of those vehicles but some GM cars have a fusible link wire that runs to the starter. I believe it goes to the alternator.

I agree with a prior post that the S and R wires may be crossed. If not check for a fusible link wire
Jan 13, 2006 at 2:50 AM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle