2000 Chevy Corvette rough/noisy at idle when cold

2000 CHEVROLET CORVETTE
Avatar
MARK REIS
  • MEMBER
  • 1 POST
Engine Mechanical problem
2000 Chevy Corvette V8 Automatic 36000 miles

I just purchased a 2000 corvette with 36000 miles on it. When I looked at the car it ran great, but apparently it was warmed up already. When I went to drive it home (about a 4 hour drive) and started it, it sounded very sickly (like someone had poured a cup of marbles in the motor). After driving it a few blocks the noise stopped and it idled fine and sounded great the rest of the trip. Starting and stopping for gas on the way home, it sounded fine, but the next day, when I started it again the noise was back. I contacted the previous owner, who said that it did that when cold and he felt it was a tension pully assembly for one of the belts. Before taking it to be looked at, I would like to know if that could be the case or what other things could be causing the problem.
Nov 29, 2009 at 10:09 AM
Advertisement
Avatar
MERLIN2021
  • ASE Certified Mechanic
  • 17,250 POSTS
  • ASE Certified Mechanic
Have all the pulleys checked, any of the pulleys except P/S pump, could make noise. It is possible, and a good place to start!
Nov 29, 2009 at 10:25 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.