SPONSORED LINKS

1999 Chevy Cheyenne Engine wont crank

Tiny
COREY BURFORD
  • MEMBER
  • 1999 CHEVROLET CHEYENNE
  • V8
  • 2WD
  • AUTOMATIC
  • 97,000 MILES
I have placed a Diognastic computer to the truck and replaced all parts associated with issues. Engine cranks but will not turn over, but will start immediatly if starter fluid is used. The only remaining code in the computer is mass air flow senser input high.
SPONSORED LINKS
Sunday, March 2nd, 2008 AT 10:22 PM

3 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
You have a fuel issue-check the fuel pressure and report back you findings-BTW when key is at run position-do you hear the fuel pump.
Was this
answer
helpful?
Yes
No
Sunday, March 2nd, 2008 AT 10:30 PM
Tiny
COREY BURFORD
  • MEMBER
  • 2 POSTS
We had the fuel pressure checked at that time it was good, the fuel pump runs when the key is turned. Im at a total loss. All plugs are firing properly I replaced the ignition module and the EGR valve
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, March 2nd, 2008 AT 10:53 PM
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Check engine compression/valve and ignition timing.

What was the fuel pressure when you checked it?
Was this
answer
helpful?
Yes
No
Monday, March 3rd, 2008 AT 12:12 AM

Please login or register to post a reply.

Related Engine Not Cranking Over Content

Starter Not Working
GUIDE
Starter Not Working
This guide is designed to help you identify whether the issue with your non-working starter motor is due to an electrical problem or a fault within the starter motor itself...
VIEW MORE

Sponsored links