Blazer gauges read low - won't start

Avatar
VIKEZFAN
  • MEMBER
  • 20 POSTS
I have a 1995 Blazer 4x4. For a while now, the fuel and voltage gauges have read just a little higher than they should. Now, the voltage gauge reads about 3 volts low and the Blazer won't start. I have checked the voltage and even charged the battery just in case. The voltage pulls down to 11.1 volts when cranking, but the gauge reads clear down in the red. I can't help but think that these are related. Maybe the computer won't let it start because it thinks the voltage really is that low. Any Ideas?
Nov 25, 2007 at 3:03 AM
Advertisement
Avatar
VIKEZFAN
  • MEMBER
  • 20 POSTS
I just wanted to mention that the Blazer had been running perfectly prior to it's not starting. It was driven twice that day and simply would not start the next time. I used a code grabber and it showed that there were no stored codes.
Nov 26, 2007 at 2:16 AM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle