SPONSORED LINKS

'00 Blazer Fuel Pump

Tiny
DALMATIANDAD
  • MEMBER
  • 2000 CHEVROLET BLAZER
I replaced the fuel pump in my '00 Blazer 2 weeks ago. The vehicle ran fine until it stalled at a stop sign. Now, the vehicle will not start. It cranks but doesn't start. I can hear the fuel pump run when I turn the key. My question is, how do I check the pump pressure? It's getting a spark, so it should run.
SPONSORED LINKS
Tuesday, April 17th, 2007 AT 7:29 PM

2 Replies

Tiny
DE3N8FAN
  • MEMBER
  • 15 POSTS
It should be on the fuel line between engine and fire wall.(Looks like a tire valve.) You will have to borrow a gas pressure guage from a friend or buy one. Most auto parts stores dont rent them anymore because, if someone had contaminated gas it could be passed on to the next renter. Good luck.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, April 20th, 2007 AT 7:08 PM
Tiny
LES DANE
  • MEMBER
  • 52 POSTS
Did you change the fuel filter when you changed the pump?
Was this
answer
helpful?
Yes
No
Tuesday, April 24th, 2007 AT 5:05 PM

Please login or register to post a reply.

Related Fuel System Fuel Pump Replace/Remove Content

Fuel Pump Replacement
GUIDE
Fuel Pump Replacement
When a fuel pump goes out it can do so one of two ways either it can quit and stop working or it can fail intermittently causing the engine to stall or not start.
VIEW MORE

Sponsored links