1995 Chevy Beretta Piston full of gas

1995 CHEVROLET BERETTA
289,455 MILES • 4 CYL • FWD • MANUAL
Avatar
SCOOTER2SHOES
  • MEMBER
  • 1 POST
After checking a leak on the number 4 cylinder injector, i removed the harness and popped out the injector and never relieved the pressure before hand. So as you can imagine the gas was everywhere. Now after reinstallation the number 4 cylinder fills with gas as soon as i turn on the key and power the fuel pump. What would cause this? Pressure regulator maybe??
Aug 31, 2010 at 2:42 AM
Advertisement
Avatar
WRENCHTECH
  • ✓ASE Certified Mechanic
  • 20,761 POSTS
  • ASE Certified Mechanic
Unplug the injector and plug a noid light into it. Now see if it lights up when the key is turned on. If it does, then the ground pulse wire to the computer is shorted to ground somewhere. If not, then the injector is just bad.
Aug 31, 2010 at 4:43 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.