2004 Chevy Avalanche removal and installation inner tie rod

Tiny
BLUAVE0455
  • MEMBER
  • 2004 CHEVROLET AVALANCHE
  • V8
  • 4WD
  • AUTOMATIC
  • 78,000 MILES
I would like to know the step by step procedure of removing and installing of spicer brand inner tie rods.
Thursday, November 6th, 2008 AT 8:52 PM

1 Reply

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,885 POSTS
Replacing the outer tie rod is easy to do. However the inner tie rod requires special tools to complete. Tool number J34028 is required. Because of the involvement for this process, I strongly recommend getting a manual that provides step by step instructions and pictures to identify parts. Also, have the vehicle alignment rechecked after doing the work.

Let me know if you have other questions. And please understand, because of the involvement and component being worked on (steering) there is too much room for error via the internet.

Joe
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, March 23rd, 2009 AT 5:47 PM

Please login or register to post a reply.

Related Tie Rod End Replace/Remove Content

Tie Rod End Replacement
GUIDE
Tie Rod End Replacement
EV's and gas power cars are equipped which tie rod ends which is needed to connect the rack and pinion or steering box to the spindle and front wheels that control the...

Sponsored links