I have repalce my water Pump and I am having trouble reinstalling the serpentine belt. I dont know how the tensioner device is set up.
Dec 9, 2008 at 5:07 PM
1992 Chevy Astro Serpentine Belt
1992 CHEVROLET ASTRO
RAEVAN
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Hi:
The tensionier is designed to be pulled to the right to loosten tension then spring loaded to go back to the left. It will require one of the following to turn: 3/8 ratchet, 1/2 inch ratchet, 15mm box end, or a 16mm box end. Sorry I can't be more specific, but they have changed so many times over the years.
Let me know if this helps.
Joe
The tensionier is designed to be pulled to the right to loosten tension then spring loaded to go back to the left. It will require one of the following to turn: 3/8 ratchet, 1/2 inch ratchet, 15mm box end, or a 16mm box end. Sorry I can't be more specific, but they have changed so many times over the years.
Let me know if this helps.
Joe
Dec 16, 2008 at 5:16 PM
Advertisement