Changed wheel hub, now no brakes

2005 DODGE DURANGO
180,000 MILES • 4.7L • V8 • 4WD • AUTOMATIC
Avatar
SEMPER942000
  • MEMBER
  • 1 POST
Changed the front axles, wheel hub,and brake calipers. After I put all back together and bled the brakes the front brakes will not work. brake pedal goes to the floor. No leaks. is this an ABS issue ? Please help
Jul 12, 2019 at 1:00 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
SCGRANTURISMO
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 4,897 POSTS
Hello,

This sounds to me like you might still have air in the lines, or there is a leak somewhere in the system. Brakes use hydraulic pressure to squeeze the calipers and apply the brakes, so there can be no leaks or air in the system. Here is a link for you to go to below:

https://www.2carpros.com/articles/brake-pedal-goes-to-the-floor

Please go through this guide and get back to us with what you are able to find out.

Thanks,
Alex
2CarPros
Jul 12, 2019 at 2:17 PM
Advertisement