Changed the water pump and now fan isn't turning on

Tiny
KINGSTON3
  • MEMBER
  • 2004 ISUZU ASCENDER
  • 6 CYL
  • 4WD
  • AUTOMATIC
  • 119,000 MILES
Had to change out the water pump and when I put everything back together the fan isn't turning on.

Is the water pump driven by the timing belt?
Saturday, April 5th, 2014 AT 5:45 AM

1 Reply

Tiny
KNOWLEDGE IS POWER
  • MECHANIC
  • 1,136 POSTS
You may have damaged the coolant temp sensor or the plug. Make sure that the coolant temp sensor is also plugged in all the way and that it clicks the lock tab on the plug. To make sure the fan works turn on your air conditioner. The fan should come on with the air-conditioner regardless of whether the coolant temp sensor is working or not. If the fan doesn't come on check to make sure it is plugged in properly
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, April 5th, 2014 AT 6:59 AM

Please login or register to post a reply.

Related Water Pump Replace/Remove Content

Water Pump Replacement
VIDEO
Water Pump Replacement
Instructional repair video

Sponsored links