Car turns over but will not start, code P0340

2006 MITSUBISHI GALANT
133,000 MILES • 2.4L • 4 CYL • 2WD • AUTOMATIC
Avatar
JENJEN78552
  • MEMBER
  • 1 POST
I was driving and while stopped at a light the car turned off. I tried to start it and it would crank but not start. While trying when it cranks it cranks slower than usual. I towed it home and checked the codes and came up with code P0340 camshaft position sensor malfunction. I changed the CMP and it still shows the code and will not start. I have checked the wiring and all looks good. What could be the problem?
Feb 19, 2018 at 6:30 AM
Advertisement
Avatar
ASEMASTER6371
  • ✓Experienced Mechanic
  • 52,796 POSTS
Good evening.

I would start by making sure the camshaft is actually turning when the engine is cranked. the sensor may have coded due to no signal.

also, check the compression, spark and see if the fuel pump is working.

Roy
Feb 19, 2018 at 6:44 AM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Ask a new question

Frequently Asked Problems for This Vehicle