Car runs then shuts off?

2007 BMW 335
150,000 MILES • 3.0L • 6 CYL • TURBO • 2WD • MANUAL
Avatar
JJWWIILL
  • MEMBER
  • 1 POST
I recently had my engine pulled out, I had to drop the pan to look for belt and I also swapped the head over because of a rounded injector bore. Now when I start the car it runs for a little the dies no matter how much gas I give it. If I unplug the crank sensor it will long crank but start and run pretty good.
Sep 29, 2025 at 7:12 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
BLACKOP555
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 10,386 POSTS
Any codes? Make sure its timed right. I would verify timing and vacuum leaks first.
Sep 29, 2025 at 5:57 PM
Advertisement
Avatar
STRAILER
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 54,178 POSTS
We need to run the codes to see which ones are stored to help us fix the problem, here is a guide to help us get started:

https://www.2carpros.com/articles/checking-a-service-engine-soon-or-check-engine-light-on-or-flashing

Please upload pictures or videos in your response, it will help us see what is wrong.

Sep 30, 2025 at 10:02 AM