My car does everything right in park including rev's, when I put her into gear there is no power and will not do anything.
May 22, 2021 at 8:17 PM
When transmission is shifted into gear the engine loses power?
2016 NISSAN PATHFINDER
RESIDUALSILVER
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Hi,
When you place it in gear and it does nothing, does the engine rev as if it is in neutral? Also, have you had the can-bus system scanned for trouble codes? CAN stands for controller area network. Basically, all the computers and modules are tied together via a few wires. If you scan the CAN, it will identify problems regardless of what module is it stored in.
Here is a video showing how it is done:
https://youtu.be/InIlnsjOVFA
Let me know what all has been done, if the shifter feels the same, and exactly what it does when placing it in gear.
Take care,
Joe
When you place it in gear and it does nothing, does the engine rev as if it is in neutral? Also, have you had the can-bus system scanned for trouble codes? CAN stands for controller area network. Basically, all the computers and modules are tied together via a few wires. If you scan the CAN, it will identify problems regardless of what module is it stored in.
Here is a video showing how it is done:
https://youtu.be/InIlnsjOVFA
Let me know what all has been done, if the shifter feels the same, and exactly what it does when placing it in gear.
Take care,
Joe
May 23, 2021 at 8:18 PM
Advertisement