SPONSORED LINKS

CAR HESITATES WHEN REVING OR DRIVING

Tiny
AKINYEMI22
  • MEMBER
  • 2002 TOYOTA RAV4
  • 200,000 MILES
I am currently working on a 2002 toyota RAV4, It hesitates when accelerating or reving when its Idle, So I had it scanned and there were numerous trouble codes cylinder misfire cylinder 1-4, So I replaced the old plugs with new ones, after sometime I scanned the car again and the trouble codes were cleared. But the car still hesitates when accelerating or reving it. What could be the cause
SPONSORED LINKS
Monday, July 15th, 2013 AT 7:43 AM

10 Replies

Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
This is going to have to be diagnosed using a scan tool and analyzing the sensor data. It could be many, many different things like MAF, vacuum leaks, low fuel pressure, incorrect temp sensor readings, intake snorkel leaks, etc, etc.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, July 15th, 2013 AT 8:08 AM
Tiny
AKINYEMI22
  • MEMBER
  • 10 POSTS
I just remembered there was also a code something about MAF I don't remember the trouble code itself but I remember it didn't clear when I tried to clear it, could this be the cause, I was thinking towards the fuel system
Was this
answer
helpful?
Yes
No
Monday, July 15th, 2013 AT 8:15 AM
Tiny
AKINYEMI22
  • MEMBER
  • 10 POSTS
Also is it possible to do a fuel pressure test with a scanner
Was this
answer
helpful?
Yes
No
Monday, July 15th, 2013 AT 9:00 AM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
Not on a Toyota
Was this
answer
helpful?
Yes
No
Monday, July 15th, 2013 AT 9:03 AM
Tiny
AKINYEMI22
  • MEMBER
  • 10 POSTS
So could the MAF be the problem since it displayed some DTC and they couldn't be cleared
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, July 15th, 2013 AT 9:14 AM
Tiny
AKINYEMI22
  • MEMBER
  • 10 POSTS
Hello nobody has given a clear explanation on how I'll troubleshoot the above mentioned areas, I'm still waiting for your reply
Was this
answer
helpful?
Yes
No
Monday, July 15th, 2013 AT 11:23 AM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
Re-read my first reply
Was this
answer
helpful?
Yes
No
Monday, July 15th, 2013 AT 11:29 AM
Tiny
AKINYEMI22
  • MEMBER
  • 10 POSTS
I have gone through your reply, like I mentioned earlier what should I look out for with the MAF cause I remember having MAF trouble codes
Was this
answer
helpful?
Yes
No
Monday, July 15th, 2013 AT 11:40 AM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
All of the sensor data has to be analyzed in the scan tool looking for anything out of parameter.
Was this
answer
helpful?
Yes
No
Monday, July 15th, 2013 AT 11:44 AM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
Most good scan tools will give you expected sensor values.
Was this
answer
helpful?
Yes
No
Monday, July 15th, 2013 AT 11:47 AM

Please login or register to post a reply.

Related Engine Revs Up Content

Idle Air Control Motor Replacement
GUIDE
Idle Air Control Motor Replacement
The idle air control motor or idle speed control motor is designed to adjust the air flow into the intake manifold at engine idle. Engine idle speed is monitored by the PCM...
VIEW MORE

Sponsored links