Camshaft position sensor location?

2020 CHEVROLET SILVERADO
110,000 MILES • 5.3L • 4WD • AUTOMATIC
Avatar
WILLHAND89
  • MEMBER
  • 6 POSTS
Can’t seem to locate the sensor. Some say it’s on the back of the motor while some say it’s on the front. I looked for diagrams and videos with very little luck
Aug 29, 2026 at 12:32 PM
Advertisement
Avatar
STRAILER
  • Experienced Mechanic
  • 55,319 POSTS
Yep, the crankshaft position sensor is behind the starter motor that is why it is tough to see. Here is an image of the location and a video to yep show you how to replace it.

https://youtu.be/-Ib3Lkde3Wo?si=Ef3WAHWehNmw2pQY

You will need to do a relearn on the sensor so be ready for that. Please check out the images below.
Aug 31, 2026 at 9:01 AM
Avatar
WILLHAND89
  • MEMBER
  • 6 POSTS
I’m looking for the camshaft sensor
Aug 31, 2026 at 12:34 PM
Avatar
STRAILER
  • Experienced Mechanic
  • 55,319 POSTS
DOH! sorry, here is the location of the camshaft sensor, it is behind the water pump pulley. What code are you getting?
Sep 1, 2026 at 4:26 PM
Avatar
WILLHAND89
  • MEMBER
  • 6 POSTS
P0340 and p0341
Sep 1, 2026 at 5:37 PM
Avatar
WILLHAND89
  • MEMBER
  • 6 POSTS
Also just had the motor replaced less than 100 miles ago. All the accessory parts are from the original motor though
Sep 1, 2026 at 5:39 PM
Avatar
STRAILER
  • Experienced Mechanic
  • 55,319 POSTS
Okay, so with these codes I would try looking at the electrical connector and then replace the sensor, but I can tell you it might be a problem with the camshaft timing or the camshaft actuator oil control valve. Does the engine have the correct amount of engine oil and is the oil pressure okay?
Sep 3, 2026 at 8:07 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.