Where is the camshaft A and B Bank 1 and 2 sensors located?

2017 NISSAN PATHFINDER
127,272 MILES • 3.5L • V6 • 4WD • AUTOMATIC
Avatar
JASON2NICKI
  • MEMBER
  • 1 POST
On the vehicle listed above S where is the camshaft sensor A side and B side we have a code that the camshaft senor A and misfire but can't locate a 100% guaranteed spot. we see both. and which side of the motor is bank 1. we have code bank 1 over retarded and want to make sure that's the ones under the dash since the motor is side ways compared to others. please help with location of camshaft A location and Bank 1 location. Also, the VVT solenoid, which one is on the camshaft A side?
Mar 27, 2025 at 3:57 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
STRAILER
  • CAR REPAIR CONTRIBUTOR
  • 54,189 POSTS
I have seen the engine oil be low or need to be changed which can cause these codes. Bank one is against the fire wall. Let me know how it goes.
Mar 27, 2025 at 11:02 AM
Advertisement
Avatar
JASON2NICKI
  • MEMBER
  • 1 POST
We have already changed the oil and even changed brands because we read that that might be an issue. But thank you!
Mar 27, 2025 at 11:52 AM
Avatar
STRAILER
  • CAR REPAIR CONTRIBUTOR
  • 54,189 POSTS
Np, I need to say that most of the time the sensor will not fix the problem, what happens is the timing chain stretches, or the camshaft actuators are not working correctly due to wear or the oil control valves are clogged or stuck open. FYI.
Mar 28, 2025 at 9:11 AM