How to install the mass air flow?
Mar 7, 2010 at 9:09 PM
how to install mass air flow?
2000 CADILLAC DEVILLE
HOLLOWMAN
- MEMBER
- 1 POST
Advertisement
RASMATAZ
- ✓ASE Certified Mechanic
- 75,992 POSTS
REMOVAL PROCEDURE
1. Disconnect the MAF/IAT sensor electrical connector.
2. Remove the clamps securing the MAF/IAT sensor assembly to the air cleaner and intake air duct. NOTE: Refer to MAF and Screen Notice in Service Precautions.
3. Carefully remove the MAF/IAT sensor from the air cleaner and intake air duct.
INSTALLATION PROCEDURE
NOTE: Refer to MAF and Screen Notice in Service Precautions.
1. Carefully install the MAF/IAT sensor into the air cleaner and intake air duct. NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the clamps securing the MAF/IAT sensor assembly to the air cleaner and intake air duct. Tighten Tighten the clamps to 3 N.m (26 lb in) .
3. Reconnect the MAF/IAT sensor electrical connector.
1. Disconnect the MAF/IAT sensor electrical connector.
2. Remove the clamps securing the MAF/IAT sensor assembly to the air cleaner and intake air duct. NOTE: Refer to MAF and Screen Notice in Service Precautions.
3. Carefully remove the MAF/IAT sensor from the air cleaner and intake air duct.
INSTALLATION PROCEDURE
NOTE: Refer to MAF and Screen Notice in Service Precautions.
1. Carefully install the MAF/IAT sensor into the air cleaner and intake air duct. NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the clamps securing the MAF/IAT sensor assembly to the air cleaner and intake air duct. Tighten Tighten the clamps to 3 N.m (26 lb in) .
3. Reconnect the MAF/IAT sensor electrical connector.
Mar 8, 2010 at 12:03 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.